Wednesday , 30 October 2024
Home A mushroom with potential

A mushroom with potential

The more technologies that are used today, the more the question arises as to how they can become more robust and at the same time more sustainable. After all, vacuum cleaner robots, smartphones or computer circuit boards also have to be disposed of at some point. Sustainable alternatives made from plants or fungi could help here.

Austrian researchers, for example, have developed a printed circuit board based on the common tree fungus Glossy Lavender, as published in the journal Science Advances.

Circuit boards made from tree fungus

Printed circuit boards serve as carriers for electronic components and connect them to one another using so-called conductor tracks. The plate itself is made of a stable and electrically insulating material, mostly plastic or silicon. With the fungus, on the other hand, biodegradable electronic circuit boards can develop, which decompose themselves within a very short time within several weeks.

This is possible through so-called fungal mycelia. These are the root networks of fungi, which in nature have huge subterranean networks of fibers. The mycelial skin is used for the printed circuit boards. The skin of the mushroom mycelia is both heat-resistant, robust and flexible.

Simple and resource-saving production

Production begins with beech shavings, wholemeal spelled flour, gypsum and water – and with spores of the shiny lacquer polypore. The research team from the Johannes Kepler University Linz allowed the mycelium to grow on it. In the last step, the skin was then pulled off the mycelium, dried, pressed and cut to the right size. Conductor tracks can then be added and electronic components can be attached as with conventional printed circuit boards.

According to the research team, circuit board production is easier, requires less energy and water than conventional production and does not use harmful chemicals. So far, it has been possible to produce simple and small printed circuit boards.

The researchers also use the fungal mycelia to make batteries. In such a battery, both the membrane between the poles and the shell can consist of the mycelium of the shiny lacquer polypore.

Mushroom mycelium – a complex and adaptive network

In addition to the properties of the mycelial skin in electronics, the mycelium itself can also be of interest to science. Because the fungal mycelium is a living, complex and adaptable material that forms large networks. These networks in turn consist of elongated cells, the so-called hyphae. The hyphae absorb water and nutrients, which is how the fungus spreads in nature.

In most of the previously known application approaches, however, the fungi used die at the end of the process or are removed again. Researchers at the Swiss Federal Institute of Technology in Zurich are now also using the adaptive behavior to develop a self-healing and robust robot skin.

Living robot skin from the 3D printer

As the research team describes in the journal Nature Materials, a three-dimensional grid is printed from a hydrogel in a 3D printer. The hydrogel is loaded with spores of the glossy lacquer polypore. If the scaffold is left to stand for several days at 23 degrees Celsius and a high relative humidity of 95 percent, the mycelium grows without the hydrogel drying out.

Within 20 days, the fungal mycelia colonize the printed grid, resulting in a robust and regenerating skin. If this is cut through or punctured, it grows back together. Responsible for this is the metabolic activity of the mycelia and the availability of nutrients.

Robot wetted with mycelium

The living robot skin made of mycelium is soft, waterproof, regenerative and resistant to mechanical influences. Thus, the properties of the skin through the mycelium are comparable to some of the functions of biological animal skins.

The researchers conducted tests using a robotic arm and a ball robot covered with a skin of mycelium. The robots successfully completed underwater actions or were rolled over different surfaces.

Further research approaches and possible areas of application

Both research approaches show that the use of fungal mycelia is still in its infancy. For example, complex printed circuit boards are to be made from smoother mycelial skin in the future, and there is also a need for further research in order to be able to keep the metabolic activity and thus the living robot skin alive in the long term.

But research is also being carried out with the mushroom mycelium beyond electronics and robotics, for example for sustainable dam and building materials or for a hard-wearing alternative to leather.

Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Articles

Cryptocurrency

AMC shares soar as judge rejects APE deal in surprise ruling

Shares in AMC Entertainment Holdings surged on Tuesday, after a judge denied...

Automobile

Ferrari’s Next-Generation Flagship Hypercar, F250, Spotted Testing

Ferrari is preparing to unveil its highly anticipated next-generation flagship road car,...

Cryptocurrency

Anticipation for Apple’s VR Headset Release Boosts VR Crypto Tokens

Apple Shares and VR Tokens Parallel Rise Apple’s share price has risen...

Global Economy

Spotlight on 2023: S&P 500 and the Significance of the 4400 Level

In our past exploration of the financial landscape of 2023, we delved...